Technical information
- Length
- approx. 2400 - 2950 mm
- Width
- approx. 160 - 240 mm in steps of 20 mm
- Thickness
- approx. 9 / 12 / 15 / 18 mm
- Top surface
- approx. 2.8 mm; glued waterproof and formaldehyde-free.
- Construction
- Construction: Multi-layer engineered board. Top layer: Oak veneer. Carrier: Birch plywood.
- Surface
- Finished diffusion-open Schotten & Hansen surface. Surface treatment with natural oils, resins and waxes. Schotten & Hansen surfaces are regenerable; sanding or mechanical processing is not necessary. Avoid strongly acidic and alkaline agents.
- Notes
- Specifications shown refer to oak; other woods on request. Short length share (1450 mm, 1950 mm) up to 10%.
Special features
Fire behaviour classification Cfl - s1 according to EN 13501-1:2010
Chemical resistance according to EN 13442:2023-04, method A+B: predominantly no visible changes
Slip resistance EN 16165:2021-10 Annex B: Class R9, Annex D: floor system suitable for unrestricted use
Formaldehyde emission according to EN 14342: Class E1, measured according to EN 717-1
Underfloor heating suitable for hot water or electric underfloor heating
VOC emissions according to AgBB scheme < 1 mg / m3
Easy to clean with Schotten & Hansen care products
Recyclable according to waste wood regulation category A2
