Technical information
- Length
- Classic herringbone (90°): approx. 500 / 600 / 700 mm. French herringbone (45°): approx. 400 / 480 / 560 mm.
- Width
- approx. 100 / 120 / 140 mm
- Thickness
- approx. 19 mm (+/- 0.5 mm)
- Top surface
- approx. 4.5 mm (+/- 0.5 mm); glued waterproof and formaldehyde-free.
- Construction
- Construction: Three-layer with swelling and shrinkage protection. Top layer: oak, other woods on request. Carrier: softwood.
- Surface
- Schotten & Hansen pre-finished, permeable surface. Surface treatment with natural oils, resins and waxes. Schotten & Hansen surfaces can be regenerated without sanding or mechanical treatment.
- Notes
- Specifications shown refer to oak. Other woods are available on request.
Special features
Fire behaviour classification Cfl - s1 according to EN 13501-1:2010
Chemical resistance according to EN 13442:2023-04, method A+B: predominantly no visible changes
Adhesive quality JAS 240:2003 (JAS II): conditions fulfilled
Slip resistance EN 16165:2021-10 Annex B: Class R9, Annex D: floor system suitable for unrestricted use
Footstep sound EN ISO 10140-3:2021-09: 15 dB
Formaldehyde emission according to EN 14342: Class E1, measured according to EN 717-1
Underfloor heating suitable for hot water or electric underfloor heating
VOC emissions according to AgBB scheme < 1 mg / m3
Easy to clean with Schotten & Hansen care products
Recyclable according to waste wood regulation category A2
