Technical information
- Length
- approx. 2450 - 5000 mm in steps of 500 mm
- Width
- approx. 160 - 360 mm (fine character selection), approx. 160 - 420 mm (medium character selection), approx. 200 - 360 mm (coarse character selection), in steps of 20 mm
- Thickness
- approx. 19 mm (+/- 0.5 mm)
- Top surface
- approx. 4.5 mm (+/- 0.5 mm); glued waterproof and formaldehyde-free.
- Construction
- Construction: Three-layer construction. Top layer: Oak veneer, other types of wood on request. Carrier: Softwood.
- Surface
- Finished diffusion-open Schotten & Hansen surface. Surface treatment with natural oils, resins and waxes. Schotten & Hansen surfaces are regenerable; sanding or mechanical processing is not necessary. Avoid strongly acidic and alkaline agents.
- Notes
- Specifications shown refer to oak; other woods on request. Short length share (1450 mm, 1950 mm) up to 10%.
Special features
Fire behaviour classification Cfl - s1 according to EN 13501-1:2010
Chemical resistance according to EN 13442:2023-04, method A+B: predominantly no visible changes
Adhesive quality JAS 240:2003 (JAS II): conditions fulfilled
Slip resistance EN 16165:2021-10 Annex B: Class R9, Annex D: floor system suitable for unrestricted use
Footstep sound EN ISO 10140-3:2021-09: 15 dB
Formaldehyde emission according to EN 14342: Class E1, measured according to EN 717-1
Underfloor heating suitable for hot water or electric underfloor heating
VOC emissions according to AgBB scheme < 1 mg / m3
Easy to clean with Schotten & Hansen care products
Recyclable according to waste wood regulation category A2
